Detailed description:
Mastermill 70SQ is an electro-permanent magnetic clamping plate with a pole size of 70 x 70 mm, a construction with a total height of 68 mm and a nominal clamping force of 170 N / cm2. Around the perimeter of the magnet is practical offset for the clamps, the magnet also has enough space for through holes.
The standard design includes a quick „bayonet“ coupling connector, stop blocks on 2 sides and a the 6 metre-long armored power cord. All magnetic poles are provided with M8 threads for easy mounting of pole extensions.
Important parameters:
Application: Milling
Technology: Electropermanent
Holding force: 170 N/cm2
Min. workpiece size: 150 x 150 x 17 mm
Poles: Square – steel/stainless steel combination for high durability and long service life
Regrinding limit: 6 mm
Pole size: 70 x 70 mm
Chuck height 68 mm
Guarantee: 2 years
Additional information:
Beyond the standard design, the customer can choose:
different cable outlet location on the magnet
fixed (screwed) el. outlet – the connector is moved to the control unit
through going holes for fastening the magnet to the table
centering stones and grooves on the bottom side of the body for precise installation (centering with the machine table axis)
multi-section chuck (possibility to devide the clamping area into several independent segments)
If you have any questions about the arrangement of the chuck or about the selection of a suitable control unit, contact us. We will be happy to advise you.
Use:
Machining of uneven parts up to 5 sides
Clamping of a wide range of workpiece sizes during milling
Clamping of large forms, castings, blocks, structures, etc.
Rough grinding of large parts
Scope of supply:
Magnetic chucks
Side stop blocks
Armoured power supply cord
Certificate
Operation and maintenance instructions
Catalog number
Number of poles
W (mm)
L (mm)
H (mm)
weight (kg)
MM70300620
18
300
620
68
86
MM70300820
24
300
820
68
114
MM703001020
30
300
1020
68
142
MM70380420
16
380
420
68
74
MM70380540
20
380
540
68
95
MM70380620
24
380
620
68
109
MM70380820
32
380
820
68
144
MM703801020
40
380
1020
68
180
MM70460540
25
460
540
68
115
MM70460620
30
460
620
68
132
MM70460820
40
460
820
68
175
MM704601020
50
460
1020
68
218
MM70580620
36
580
620
68
167
MM70580820
48
580
820
68
221
MM705801020
60
580
1020
68
274
Detailed description:
The Mastermill electropermanent magnetic chuck is a chuck with 50×50 mm square poles, a compact low design (only 51 mm high) and a nominal holding force of 170 N/cm2. The electromagnet has a practical offset (slot) around its entire perimeter for clamps and there is also enough space on the magnet to perform through clamping holes.
The standard delivery includes magnet with a quick “bayonet” coupling connector, stop blocks on 2 sides, and with a 6 metre-long armoured cable.
Important parameters:
Application: Milling
Technology: Electropermanent
Holding force: 170 N/cm2
Min. workpiece size: 50 x 110 x 20 mm
Poles: Square
Regrinding limit: 6 mm
Pole size: 50 x 50 mm
Top plate: steel/stainless steel combination
Guarantee: 2 years
Additional information:
Beyond the standard design, the customer can choose:
different cable outlet location parts
through going holes for fastening the magnet to the table
a top plate with a corrosion resistant gaps between the poles
If you have any questions about the arrangement of the chuck or about the selection of a suitable control unit, contact us. We will be happy to advise you.
Use:
Machining of uneven parts up to 5 sides
Clamping of a wide range of workpiece sizes during milling
Clamping of large forms, castings, blocks, structures, etc.during drilling operations
Rough grinding of large parts
Scope of supply:
Magnetic chuck
Side stop blocks
Armoured power supply cable
Certificate
Instructions for use
Parameters:
Model
Number of poles
W (mm)
L (mm)
H (mm)
Weight (kg)
MM50300490
24
300
490
51
49
MM50300600
32
300
600
51
61
MM50300800
40
300
800
51
82
MM50300900
48
300
900
51
92
MM50420490
36
420
490
51
70
MM50420600
48
420
600
51
86
MM50420800
60
420
800
51
114
MM50420900
72
420
900
51
128
MM50480600
56
480
600
51
97
MM50480800
70
480
800
51
130
MM50480900
84
480
900
51
146
MM50480990
84
480
990
51
161
MM50580800
80
580
800
51
157
MM50580900
96
580
900
51
177
MM50850990
96
580
990
51
194
Detailed description:
The Grindmaster electro-permanent magnetic chuck is highly accurate and can hold both small and thin parts as well as larger workpieces. A short electrical pulse is sufficient to turn it on and off and thus very economical. It has a high level of safety, where workpieces are still held by means of strong permanent magnets in the event of a sudden power failure. We can offer you several pole pitch variants. The chuck has a holding force of up to 120 N/cm2 evenly distributed across the surface of the chuck.
Important parameters:
Application: Grinding
Technology: Electro-permanent
Pole pitch: T5 4+1 mm or T18 15+3 mm
Holding force: up to 120 N/cm2
Poles: Transverse
Guarantee: 2 years
Use:
clamping of small and larger workpieces during grinding
Scope of supply:
Magnetic chuck
Power supply cable
Certificate
Instructions for use
Parameters:
Model
W (mm)
L (mm)
GM200400
200
400
GM200600
200
600
GM300600
300
600
GM400600
200
600
GM400800
400
800
GM500950
500
950
GM6001000
600
1000
GM6001200
600
1200
GM6001500
600
1500
GM7001410
700
1410
The MH-107 digital residual magnetism meter is used to measure residual magnetism in workpieces that have been exposed to magnetic clamping or other magnetic fields. A high residual magnetic field in a semi-finished product can cause problems during further processing (e.g. welding, machining, etc.) and, in finished products, can affect the functionality of certain equipment; therefore, it is sometimes necessary to monitor the strength of the residual magnetic field. If the residual magnetism is too high, you can remove it using our demagnetisers.
Key specifications:
Application: Measurement of residual magnetism
Technology: Electronic device (battery-powered)
Battery life: up to 130 hours
Measuring range: 0–3000.0 mT
Units: Gauss or kA/m
Warranty: 2 years
Uses:
Checking residual magnetism on workpieces and components
Verifying the effectiveness of demagnetisation after using demagnetisation equipment
Measuring the magnetic field following magnetic clamping or other manufacturing operations
Package contents:
Measuring instrument
Measuring probe
Set of alkaline batteries
User manual
Parameters
Model
W (mm)
L (mm)
H (mm)
Measuring range
MH-107
79
119
24
0 - 199,9 G
Detailed description:
These laminated blocks are made of a magnetically highly conductive material. They are composed of a combination of steel and brass laminations. For grinding, they are placed on the top pole plate of the magnetic chuck and after its activation, magnetic flux can enter freely into the workpiece. The blocks have a very stable construction, whereas individual laminations are not joined with bolts or screws. This allows modification of these laminated blocks according to individual customer requirements.
Important parameters:
Application: Accessories
Technology: Conventional
Block size: from 75 x 75 mm
Pole pitch: T4 3 + 1 mm
Poles: Transverse/longitudinal
Use:
Reduction of the pole plate pitch of the chuck
Expansion of application possibilities of the chuck by clamping irregularly shaped material
Package content:
Laminated block
Parameters
Model
W (mm)
L (mm)
H (mm)
Poles
LB2510075TP
75
100
25
transverse
LB25200100TP
100
200
25
transverse
LB25300200TP
200
300
25
transverse
LB25400300TP
300
400
25
transverse
LB257575LP
75
75
25
longitudinal
LB2575100LP
75
100
25
longitudinal
LB25150200LP
150
200
25
longitudinal
LB100650LP
100
650
25
longitudinal
LB150200LP
150
200
25
longitudinal
LB25150500LP
150
200
25
longitudinal
LB25200400LP
200
400
25
longitudinal
LB25300300LP
300
300
25
longitudinal
LB25400400LP
400
400
25
longitudinal
LB25400600LP
400
600
25
longitudinal
The GP250 permanent magnet is designed for handling steel sheets and plates and rotating them by 90° between a horizontal and vertical position. It enables the safe positioning of material during loading, unloading and the operation of production equipment. Thanks to the optimised distribution of the magnetic field, the magnet is also suitable for handling thin sheets, which may bend during lifting.
The large lifting eye can be secured in a vertical position, enabling safe handling of the load in both directions. As a result, a single magnet can be used both for lifting sheets from a stack and for their subsequent tilting and transport. The magnet’s design complies with the requirements of standard EN 13155 and is engineered with a focus on the safe handling of sheet metal.
The magnet is intended for handling flat loads with a smooth, even surface. For handling round bars, sections or loads with an uneven surface, we recommend using permanent magnets from the Neo or Revolift series.
Key parameters:
Applications: Lifting, handling and rotating sheet metal by 90°
Technology: Permanent magnet
Horizontal load capacity: 250 kg
Vertical load capacity: 80 kg
Minimum sheet thickness: 3 mm
Maximum material temperature: 80 °C
Safety factor: 4:1
Warranty: 1 year
Additional information:
The GP 250 is suitable for handling flat loads with a smooth, clean surface. In the case of uneven or soiled surfaces, or circular materials such as bars, tubes, etc., we recommend a permanent load magnet from the Neo series.
Applications:
Handling steel sheets and plates
Tilting sheets between horizontal and vertical positions
Removing sheets from stacks from a thickness of 4 mm
Loading and unloading sheet metal
Operating machining, cutting and manufacturing equipment
Package contents:
GP250 permanent magnet
Operating instructions
Test certificate
Parameters:
Model
W (mm)
L (mm)
H (mm)
Horizontal limit (kg)
Vertical limit (kg)
Weight (mm)
Tested break away force (kg)
GP250
200
288
40
250
80
9,75
1100
The DM benchtop demagnetiser is a compact device for the rapid demagnetisation of ferromagnetic components. It is used primarily prior to further processing operations, such as measurement, painting or assembly, where it is necessary to eliminate residual magnetism.
The device is suitable for both manual use and integration into production lines. It can, for example, be installed beneath a belt conveyor, where it enables continuous demagnetisation without operator intervention.
The demagnetiser can be used for various types of components that must be demagnetised for functional reasons or to meet the required output parameters.
Key parameters:
Application: demagnetisation of ferromagnetic components
Technology: Electromagnetic (alternating magnetic field)
Max. workpiece dimensions: 400 x 280 mm
Duty cycle: 20 %
Demagnetisation field height: up to 40 mm
Power supply: 230 VAC / 50 Hz (optionally 110 V)
Warranty: 2 years
Applications
Demagnetisation of tools, dies, bearings and other small components
Elimination of residual magnetism prior to key manufacturing operations
Flexible use – either as a stand-alone unit or as part of a production line
Expansion of the working area by combining multiple units as required
Included in the package:
Demagnetiser
Operating instructions
Parameters:
Model
W (mm)
L (mm)
H (mm)
Weight (kg)
DM3
250
180
87
8,7
DM4
280
266
87
12,6
DM5
400
306
87
17,6
Basic functions of the EPCU control unit:
possibility to control up to 4 magnetic chucks at the same time
microprocessor controlled de/magnetization of workpiece and chuck
magnetization status check – connection to the machine safety contact
possibility of connection with a PLC machine
overheating protection (safety delay between cycles)
control by the U19 wired remote control with clamping force adjustment (optional RM remote control with selection of sections and magnetizing groups)
Other functions of the EPCU:
possibility to adjust the demagnetization cycle according to the material workpieces
full demagnetization of workpiece and chuck – for uncompensated EP chucks
networking support (connecting multiple units and fixtures in large assemblies)
remote connection function (demagnetization settings, firmware update, diagnostics)
magnetization credit function gives the possibility to shorten the safety delay between cycles
Detailed description:
These laminated blocks are made of a magnetically highly conductive material. They are composed of a combination of steel and brass laminations. For grinding, they are placed on the top pole plate of the magnetic chuck and after its activation, magnetic flux can enter freely into the workpiece. The blocks have a very stable construction, whereas individual laminations are not joined with bolts or screws. This allows modification of these laminated blocks according to individual customer requirements.
Important parameters:
Application: Accessories
Technology: Conventional
Block size: from 75 x 75 mm
Pole pitch: T4 3 + 1 mm
Poles: Transverse/longitudinal
Guarantee: 2 years
Use:
Reduction of the pole plate pitch of the chuck
Expansion of application possibilities of the chuck by clamping irregularly shaped material
Package content:
Laminated block
Parameters
Model
W (mm)
L (mm)
H (mm)
Poles
LB2510075TP
75
100
25
transverse
LB25200100TP
100
200
25
transverse
LB25300200TP
200
300
25
transverse
LB25400300TP
300
400
25
transverse
LB257575LP
75
75
25
longitudinal
LB2575100LP
75
100
25
longitudinal
LB25150200LP
150
200
25
longitudinal
LB100650LP
100
650
25
longitudinal
LB150200LP
150
200
25
longitudinal
LB25150500LP
150
200
25
longitudinal
LB25200400LP
200
400
25
longitudinal
LB25300300LP
300
300
25
longitudinal
LB25400400LP
400
400
25
longitudinal
LB25400600LP
400
600
25
longitudinal
Detailed description:
The Elmag Compact is a powerful electromagnetic chuck suitable for flat grinding. The top plate is made of a single compact unit. The insulation between the poles is made of hard epoxy resin filler. The Elmag Compact chuck is delivered with stop bars and a power supply cable as standard.
Important parameters:
Application: Grinding
Technology: Electromagnet
Holding force: 130 N/cm2
Min. workpiece size: 22 x 144 x 48 mm
Poles: Oval
Pole pitch: T48 mm
Regrinding limit: 8 mm
Power supply cable length: 6 m
Guarantee: 2 years
Use:
Clamping of medium to large size parts on grinders Heavy and final surface grinding
Scope of supply:
Magnetic chuck
Set of clamps
Can Power supply cable
Instructions for use
Certificate
Parameters:
Model
W (mm)
L (mm)
H (mm)
Weight (kg)
ELMG200600
200
600
70
60
ELMG2001000
200
1000
80
116
ELMG2501000
250
1000
79
137
ELMG300500
300
500
70
76
ELMG300600
300
600
70
91
ELMG300800
300
800
70
122
ELMG3001000
300
1000
80
174
ELMG3001500
300
1500
80
260
ELMG400600
400
600
70
122
ELMG400700
400
700
70
141
ELMG400800
400
900
70
162
ELMG6001000
600
1000
80
347
ELMG6001500
600
1500
80
533
ELMG6001500
600
1500
80
689
Detailed description:
Electrofine is an electromagnetic chuck which, thanks to its design, provides holding force over the entire surface of the top plate. With minimum warming of the working area, you will obtain a unique workpiece clamp for precise grinding.
Efficient production is supported by easy operation using the control unit – just press the button or turn the switch to regulate the holding force for ideal conditions in industrial operation. This unit also allows automatic demagnetization so that no residual magnetism remains in the workpiece after unclamping.
For efficient clamping of small workpieces during surface grinding, we also offer the Microfine model.
Important parameters:
Application: Grinding
Technology: Electromagnet
Holding force: 110 N/cm2 (Electrofine), 100 N/cm2 (Microfine)
Min. workpiece size: 25 x 25 x 3 mm (Electrofine), 15 x 15 x 1 mm (Microfine)
Poles: Transverse/Longitudinal
Regrinding limit: 6 mm
Pole pitch: T4 3+1 mm - steel/brass (Electrofine), T1.9 1.4+0.5 mm - steel/brass (Microfine)
Guarantee: 2 years
Additional information:
Consult our technicians on the selection of a suitable control unit and electrical connection. The Electrofine and Microfine electromagnetic chucks can also be delivered with longitudinal poles. By request, it is possible to deliver products with different dimensions or power supply.
Scope of supply:
Magnetic chuck
Side and rear stop blocks
Set of clamps
6 m power supply cable
Instructions for use
Use:
For clamping small and large workpieces during precise surface grinding
Parameters
Electrofine
Model
W (mm)
L (mm)
H (mm)
Wattage (W)
Weight (kg)
ELEC150300T31
150
300
74
77,5
25
ELEC200400T31
200
400
74
112
41
ELEC200500T31
200
500
74
166
55
ELEC200600T31
200
600
74
137
65
ELEC300600T31
300
600
74
253
94
Microfine
Model
W (mm)
L (mm)
H (mm)
Wattage (W)
Weight (kg)
ELEC150250T1405
150
250
72
71
19
ELEC150300T1405
150
300
72
78
22
ELEC200400T1405
200
400
72
113
39
ELEC200500T1405
200
500
72
166
52
ELEC200600T1405
200
600
72
137
61
ELEC300600T1405
300
600
72
252
97
Important parameters:
Technology: Electromagnet
Holding force: 120 N/cm2
Poles: radial
Regrinding limit: 8 mm
Guarantee: 2 years
Additional information:
The pole plate can be equipped with T-slots for mounting pole extensions on request. This provides free access to the workpiece for machining the outside, inside diameter and front per one clamping, or it is possible to drill through the workpiece body. Power for the chuck is provided by a suitable control unit. The chuck can be connected via the slip ring in the machine tool spindle, or through the connector located directly on the magnetic chuck.
Use:
machining external and internal surfaces of round and ring shaped workpieces on vertical grinders
turning
Catalog number
D (mm)
H (mm)
Weight (kg)
Voltage (V)
Circu EM 400
400
90
76
110
Circu EM 500
500
90
120
110
Circu EM 600
600
100
195
110
Circu EM 700
700
100
265
110
Circu EM 800
800
100
365
110
Circu EM 1000
1000
100
550
110
Circu EM 1250
1250
123
990
110
Circu EM 1500
1500
120
1550
110
Detailed description:
The Alustar permanent magnetic circular chuck is a lightweight version of the Neostar chuck. The aluminium body reduces its weight significantly thereby allowing clamping of workpieces with larger weights than the basic Neostar version. The great advantage of the chuck is the patented switch mechanism, which makes it possible to adjust the holding force variably and fix the adjusted holding force in any position Thanks to the switching mechanism, you can switch the chuck to 10 to 20 % power to centre the workpiece easily, then switch to 100 % and proceed with safe operation. The long life span of the permanent magnetic chuck is ensured by the solid single piece top plate. Possibility to regrind by up to 5 mm. It is possible to deliver this chuck with a through-hole by request.
Important parameters:
Application: Turning, grinding
Technology: Permanent
Holding force: 140 N/cm2
Poles: Radial
Regrinding limit: 5 mm
Guarantee: 2 years
Additional information:
Beyond the standard design, the customer can choose:
Central drilling
Precise centre hole (possibly through)
Auxiliary top plate
Pole plate with T-slots
Set of pole extensions
Scope of supply:
Magnetic chuck
Ratchet wrench
Instructions for use
Use:
Turning and grinding of round and ring-shaped workpieces
Parameters:
Model
D (mm)
H (mm)
D1 (mm)
E (mm)
F (mm)
Hmotnost (kg)
ALUS20D200
200
79
20
110
180
11,5
ALUS20D250
250
79
30
166
220
18
ALUS20D300
300
82
38
180
260
27
ALUS20D350
350
84
40
220
300
36
ALUS20D400
400
84
40
260
340
47
ALUS30D500
500
109
50
330
400
98
ALUS30D600
600
109
90
350
450
142
Detailed description:
The Elmag Wave electromagnetic chuck is designed for heavy duty on industrial premises.The shifted layout of the poles (WAVE form) creates uniform distribution of the holding force both in longitudinal and transverse directions, which helps reduce shear forces during active grinding. During use, this electromagnet chuck demonstrates high stability, variability, accuracy, and a long life span.
Important parameters:
Application: Grinding
Technology: Electromagnet
Holding force: 130 N/cm2
Min. workpiece size: 120 x 40 x 20 mm
Poles: Wave type
Pole pitch: T40
Regrinding limit: 8 mm
Guarantee: 2 years
Additional information:
The Elmag Wave chuck is delivered with stop bars and the power supply cable as standard. We will be happy to help you select the control unit, just let us know.
By request, it is possible to deliver another design of the electromagnetic chuck – dimensions, location of the outlet, power supply cable length, through-holes facilitating installation of the chuck on the machine table.
Use:
Heavy and high-performance surface grinding
Roughing primarily on vertical grinders with grinding segments
Scope of supply:
Magnetic chuck
Set of clamps
Power supply cable
Instructions for use
Parameters:
Model
W (mm)
L (mm)
H (mm)
Weight (kg)
ELMGW200600
200
600
70
59
ELMGW2001000
200
1000
80
113
ELMGW2501000
250
1000
79
135
ELMGW300500
300
500
70
74
ELMGW300600
300
600
70
89
ELMGW300800
300
800
70
119
ELMGW3001000
300
1000
80
170
ELMGW3001500
300
1500
80
254
ELMGW400600
400
600
70
119
ELMGW400700
400
700
70
138
ELMGW400800
400
900
70
158
ELMGW6001000
600
1000
80
347
ELMGW6001500
600
1500
80
533
ELMGW6001500
600
1500
80
689
BM battery-powered lifting magnets offer a flexible solution for handling ferromagnetic materials without the constraints of power cables. The integrated battery and remote control allow for convenient operation even in places where it is not suitable or possible to use conventional electromagnets with a continuous power supply. The magnet is equipped with safety features to prevent accidental deactivation during handling, as well as a system providing both visual and audible battery status indicators. Thanks to its high load capacity and robust construction, it is suitable for everyday use in demanding industrial environments.
Key specifications:
Applications: Lifting and handling of ferromagnetic materials
Technology: Battery-powered electromagnet
Power supply: built-in 12V battery
Battery life: up to 8 hours at a 50% duty cycle
Load capacity: up to 5,000 kg
Maximum sheet metal thickness: 3 mm
Maximum material temperature: 50 °C
Safety factor: 2:1
Warranty: 1 year
Applications:
Handling of sheet metal, cut-to-size pieces and steel blocks
Loading and unloading of metallurgical material
Operation of burning, cutting and machining equipment
Handling of thin sheet metal from 3 mm thick
Operations where the use of power cables is not suitable
Steelworks, warehouses, service centres and manufacturing facilities
Package contents:
BM battery-powered magnet
Operating instructions
IR remote control
Test certificate
Parameters:
Model
Lifting capacity for flat material (kg)
W x L of base (mm)
H (mm)
Weight (mm)
Built in battery
Type of battery
BM1350
1350
242 x 272
508
60
12V/35Ah
FG12 - 35D
BM2500
2500
242 x 400
512
72
12V/75Ah
FG12 - 75D
BM3600
3600
240 x 1050
512
180
12V/75Ah
FG12-75D
BM5000
5000
300 x 1200
527
203
12V/75Ah
FG12-75D
BMP battery-powered lifting magnets are designed primarily for handling round timber, pipes and other circular-section profiles. However, they are also suitable for lifting flat materials, angle sections, profiles and other ferromagnetic loads.
The built-in 12V battery enables operation without an external power supply and, in combination with the remote control, ensures convenient and flexible operation. The magnetic field provides a reliable holding force even when handling loads with uneven surfaces or air gaps.
Operational safety is ensured by protection against accidental deactivation during lifting, a dual confirmation of the load release function, and a system of visual and audible low-battery warnings.
Key specifications:
Applications: Lifting and handling of ferromagnetic materials
Technology: Battery-powered electromagnet
Power supply: Built-in 12V battery
Battery life: up to 8 hours at a 50% duty cycle
Lifting capacity for flat material: up to 3,600 kg
Load capacity for round material: up to 2,260 kg
Maximum material temperature: 50 °C
Safety factor: 2:1
Warranty: 1 year
Applications:
Handling of pipes and hollow sections
Handling of round timber and circular workpieces
Handling of steel bars and section material
Handling of loads with uneven surfaces
Loading and unloading of metallurgical material
Manufacturing plants, warehouses and service centres
Package contents:
BMP battery-powered magnet
Operating instructions
IR remote control
Test certificate
Parameters:
Model
Lifting capacity for flat material (kg)
Lifting capacity for round material (kg)
Min/max diameter (mm)
W x L of base (mm)
H (mm)
Weight (kg)
Built in battery
BMP1800
1800
1130
40/440
242 x 470
659
167
12V/75Ah
BMP3600
3600
2260
45/500
262 x 760
713
420
12V/75Ah
Detailed description:
The Circu EP is an electro-permanent magnetic chuck designed for installation on rotary tables of vertical grinders for clamping of tool and hardened steels and for heavy duty turning operations. The radial layout of the individual poles is suitable for work with circular or cylindrical shapes such as bearing rings, circular rings, bushings, etc. Using the control unit, the holding force can be controlled in several steps and fast and efficient demagnetization of workpieces can be performed. Thanks to the electro-permanent technology used there is no need for permanent connection to the mains. This results in high efficiency in operation and this also ensures the highest possible clamping accuracy.
Important parameters:
Technology: Electro-permanent
Poles: Radial
Regrinding limit: 8 mm
Guarantee: 2 years
Additional information:
High holding force for clamping during the ultimate heavy duty machining, drilling, and turning operations. Available with pole plate equipped with T-slots for mounting pole extensions. The control unit can be programmed for different types of material to achieve maximum strength and effective demagnetization after machining. At the same time, it is possible to adapt the force to clamp even thinner parts without any deformation. The chuck can be connected via the slip ring in the machine tool spindle, or through the connector located directly on the magnetic chuck.
Use:
circular grinding, roughing, turning
Catalog number
D (mm)
H (mm)
Weight (kg)
Voltage (V)
Circu EP 400
400
90
76
170/340
Circu EP 500
500
90
120
170/340
Circu EP 600
600
100
195
170/340
Circu EP 700
700
100
265
170/340
Circu EP 800
800
100
365
170/340
Circu EP 1000
1000
100
550
170/340
Circu EP 1250
1250
123
990
170/340
Circu EP 1500
1500
120
1550
170/340
Detailed description:
The BJP is one of the most versatile electromagnetic chucks. The coils are arranged in the chuck for maximum utilisation of their capacities. The BJP generates a high and uniform holding force with minimum warming of the working area.
The electromagnetic chuck is easy to use due to the control unit. Simply press the button or turn the disconnect switch. You can adjust the magnetic holding force easily to create the ideal operating conditions. This operation can be partly or fully automatic due to the interconnection of a suitable control unit with the chuck and the machine control system.
The BJP chucks are fed through the control unit by 110 V DC. Besides fluent regulation of the holding force, this unit also offers automatic demagnetization so that no residual magnetism remains in the workpiece after unclamping.
Important parameters:
Application: Grinding
Technology: Electromagnet
Holding force: 130 N/cm2
Min. workpiece size: 35 x 35 x 3 mm
Poles: Transverse
Regrinding limit: 7 mm
Pole pitch: 42 mm, further refined 4+1 steel/brass
Guarantee: 2 years
Additional information:
Consult our technicians on the selection of a suitable control unit and electrical connection.
Use:
Heavy duty grinding for a wide range of workpiece sizes
Scope of supply:
Magnetic chuck
Rear and side stop blocks
Power supply cable
Certificate
Instructions for use
Parameters:
Model
W (mm)
L (mm)
H (mm)
Wattage (W)
Weight (kg)
BJP200600
200
600
98
160
77
BJP300600
300
600
98
215
118
BJP400800
400
800
100
350
212
BJP3001000
300
1000
103
350
201
BJP4001000
400
1000
103
435
269
BJP5001000
500
1000
108
530
352
BJP6001000
600
1000
113
620
420
“We use Revolift in our company for lifting heavy loads and it’s really great. It holds perfectly, is easy to operate, and makes work much faster and safer. We would definitely recommend it to anyone who needs a reliable magnet.
Alain BouryProduction Manager, Škoda Auto
Service directly in the Czech Republic
As one of the few companies on the market, we provide complete service, refurbishment and repair of all our products. We also accept inspections and testing of products from other brands. Our goal is for our magnetic systems to last you as long as possible. Therefore, we provide professional warranty and post-warranty service, repairs and refurbishments of all technologies, as well as operator training.
