We work! We respect government regulations and have tightened measures against the spread of COVID-19. Despite this, we have ensured 100% functioning of the company. Do not hesitate to contact us. We remain as strong as our magnets!
  info@walmag.cz   +420 573 341 641

News


MD series magnetic drilling machines

MD series magnetic drilling machines

30.03.2020

Looking for a magnetic drilling machine with high holding power, superb performance, and high safety?

Read more
The New Circu EM circular magnetic chuck

The New Circu EM circular magnetic chuck

23.03.2020

The Circu EM electromagnetic circular chuck is ideal for installation on rotary grinding tables and lathes. Thanks to its high clamping force, it is also suitable for thin circular or cylindrical workpieces.

Read more
TM-801 residual magnetism meter

TM-801 residual magnetism meter

16.03.2020

The TM-801 mobile meter is used to measure residual magnetism in workpieces that have been exposed to a magnetic field, for example, after machining on magnetic chucks or manipulation with lifting magnets.

Read more
Milling on permanent magnetic chuck

Milling on permanent magnetic chuck

09.03.2020

Neodymax is a magnetic chuck especially designed for grinding, but you can also mill or use it in electric discharge machining.

Read more
Easy Electric Discharge Machining

Easy Electric Discharge Machining

02.03.2020

The Neospark magnetic chuck has been developed for EDM machining. It is waterproof, has a low construction, so it does not reduce the working area during machining, and is controllable from the top, so you can use the entire immersion surface of the tank.

Read more
Magnetic base Magbase 3D

Magnetic base Magbase 3D

24.02.2020

The Magbase 3D magnetic base is the ideal way to attach the measuring arm to the steel surface of the workbench. It is very lightweight, so it can be easily moved.

Read more
GP250 crane magnet

GP250 crane magnet

17.02.2020

This handling magnet can be used to handle sheets in horizontal position, which can carry up to 250 kg, and in vertical position, when its lifting capacity is reduced to 80 kg.

Read more
Electropermanent lifting magnet for frequent handling

Electropermanent lifting magnet for frequent handling

11.02.2020

The Neo-EP handling magnet only needs power for switching the magnet ON and OFF, while the load is held by strong permanent magnets and is therefore ideal for continuous operation.

Read more
ACU 500 magnetic drilling machine

ACU 500 magnetic drilling machine

03.02.2020

Drill comfortably with the Rotoflux ACU 500 cordless drilling machine. Its magnet has a holding force of up to 1700 kg, it’s compact and lightweight, and it can be recharged quickly.

Read more
Efficient Grindmaster chuck for grinding

Efficient Grindmaster chuck for grinding

27.01.2020

Our new Grindmaster magnetic chuck is designed for grinding a wide range of workpieces, from the smallest to larger parts.

Read more
Universal magnetic chuck Unigrip

Universal magnetic chuck Unigrip

20.01.2020

This magnetic chuck is ideal for conventional grinding of medium to large parts.

Read more
Neo HV lifting arm

Neo HV lifting arm

15.01.2020

Use this Neo HV lifting arm to turn loads from horizontal positions to vertical.

Read more
MC hand magnet for easy handling of loads

MC hand magnet for easy handling of loads

06.01.2020

For manually carrying large loads easily, we offer the MC hand magnet. You can easily carry loads that are difficult to grasp. It can carry loads of up to 90 kg.

Read more
MH-107 magnetism measuring meter

MH-107 magnetism measuring meter

03.01.2020

Measuring device MH 107 to measure residual magnetism. Thanks to the practical probe, you can reach hard to access locations.

Read more
Permanent magnetic chuck for turning

Permanent magnetic chuck for turning

16.12.2019

Alustar is a magnetic plate suitable for turning in particular, but also for circular grinding.

Read more
Neomill Compact pallet magnetic chuck

Neomill Compact pallet magnetic chuck

12.12.2019

The Neomill Compact pallet is a magnetic chuck suitable for milling, grinding, electrical discharge machining and measuring operations. It holds both small and larger parts.

Read more
Year end sale!

Year end sale!

11.12.2019

On the occasion of the end of the year, We prepared a sale of -25% on stock products.

Read more
Magnetic drilling machine for use in potentially explosive atmospheres

Magnetic drilling machine for use in potentially explosive atmospheres

02.12.2019

If you are working on a site where you are worried about drilling because sparks could cause an explosion, we have the solution for you. Our AIR 400 magnetic drilling machine is a pneumatic model so you don’t need to worry about spark formation.

Read more
Trouble-free power and final grinding

Trouble-free power and final grinding

25.11.2019

If you need surface grinding, we have the Elmag Compact electromagnetic chuck for you.

Read more
Carry out milling, drilling or grinding simply with the Neomill Compact chuck

Carry out milling, drilling or grinding simply with the Neomill Compact chuck

19.11.2019

Now, no machining operation will be any trouble. Replace complicated clamps and clamping devices with a Neomill Compact permanent magnetic chuck.

Read more
Lifting hot magnetic loads? No problem!

Lifting hot magnetic loads? No problem!

13.11.2019

Do you know our Neo handling magnet, but its maximum temperature limits you? Now it doesn’t have to.

Read more
Maxgrip circular magnetic chuck

Maxgrip circular magnetic chuck

04.11.2019

Magnetic plate Maxgrip is made for turning and round grinding. Clamping force up to 160 N/cm2 ensures high machining stability.

Read more
WMB magnetic blocks for everyday use

WMB magnetic blocks for everyday use

29.10.2019

These magnetic blocks are excellent for attaching ferromagnetic parts during welding, grinding, drilling or other material processing.

Read more
HD hand-held demagnetizer

HD hand-held demagnetizer

21.10.2019

This demagnetizer is designed for mobile demagnetization of large, complicated parts, where neither table nor tunnel demagnetizers can be easily used.

Read more
Electromagnetic chuck BJP

Electromagnetic chuck BJP

14.10.2019

The BJP is one of the most versatile electromagnetic chucks. It has a uniform clamping force of up to 130 N/cm2. Thanks to the control unit, the magnet is easily operated by pressing the button and turning the switch.

Read more
BMP lifting magnet

BMP lifting magnet

07.10.2019

The battery-operated BMP magnet is specially designed for handling circular loads, but it is not a problem for it to lift flat material or various other profiles.

Read more
TDM - tunnel demagnetizer

TDM - tunnel demagnetizer

23.09.2019

This demagnetizer is ideal for demagnetizing large cylindrical or cube-shaped parts or demagnetizing thin-walled parts. Designed for continuous operation, it is ideal for production lines.

Read more
Advantages of the Elmag Wave electromagnetic chuck

Advantages of the Elmag Wave electromagnetic chuck

18.09.2019

This electro chuck is the only one of our magnets to have wave polarity. It is ideal for heavy and high-performance surface grinding. It is also particularly effective when roughing on vertical grinders.

Read more
Neomicro chuck for flat grinding

Neomicro chuck for flat grinding

09.09.2019

The permanent Neomicro chuck with up to 100 N/cm2 clamping force is ideal for precision flat grinding. It holds workpieces from 4 x 4 x 1 mm, but it can handle large parts as well.

Read more
BM battery-operated magnet

BM battery-operated magnet

02.09.2019

Do you need a lifting magnet with high load capacity and remote control? Then get a BM handling magnet. It can lift up to 5,000 kg, has high safety, and you can choose from four variants.

Read more
Visit us on EMO Hannover 2019

Visit us on EMO Hannover 2019

29.08.2019

Come and see us at the fair EMO Hannover 2019 between 16 and 21 September. You can find us in hall 5 / stand B87.

Read more
Neostar circular magnetic chuck

Neostar circular magnetic chuck

26.08.2019

Turn or grind on the Neostar magnetic chuck. It will relieve your work and save your time. Its clamping force of up to 140 N/cm2 ensures that your workpiece will not move.

Read more
DM demagnetizer for manual and belt demagnetization

DM demagnetizer for manual and belt demagnetization

19.08.2019

Do your workpieces still retain residual magnetism? With our DM table demagnetizer, it is easy to remove them. You can use it manually, but it can also be built into the production line.

Read more
Big summer sale

Big summer sale

15.08.2019

The sale ends on 15. 9. 2019 or until stocks are exhausted.

Read more
Best selling electropermanent magnetic chuck for machining Mastermill

Best selling electropermanent magnetic chuck for machining Mastermill

12.08.2019

Do you need to drill, grind or mill small and large workpieces? Mastemill chuck with high clamping force up to 170 N/cm2 is a good choice. You can machine workpieces from up to 5 sides with the help of additional pole pieces.

Read more
Neo magnet for lifting circular and flat materials

Neo magnet for lifting circular and flat materials

05.08.2019

Neo lifting magnet finds application wherever you need to lift flat or circular materials up to 2000 kg. It is used most often in workshops, construction sites, warehouses or despatch departments.

Read more
Electromagnetic chuck for surface grinding

Electromagnetic chuck for surface grinding

29.07.2019

The Elmag Compact is an electromagnetic chuck made especially for power and final surface grinding. It has a top plate made of a single compact unit; the insulation between the poles is made of hardened epoxy resin filler.

Read more
Big magnet systems

Big magnet systems

22.07.2019

You will save lots of time with our magnetic systems. You do not have to solve any complicated lifting by means of chains, clamps or other mechanical devices.

Read more
Handy magnetic drilling machines

Handy magnetic drilling machines

15.07.2019

If you need to combine a conventional handheld drilling machine and a stand, our magnetic drilling machines are ideal for you. The strong electromagnet holds the drilling machine onto the ferromagnetic material perfectly and you can drill conveniently with both a core drill and a spiral drill.

Read more
Demagnetization and demagnetizing effect

Demagnetization and demagnetizing effect

08.07.2019

If a ferromagnetic material has been exposed to a magnetic field, it is possible that the material retains the so called residual magnetism. But it is not a great problem at all. We offer various types of demagnetizers to remove it.

Read more
Machining on magnetic chucks

Machining on magnetic chucks

01.07.2019

Mill, grind, turn or drill using the most advanced technology available. With our magnetic chuck, you will speed up and simplify your work. We offer magnetic chucks with a high clamping force of up to 170 N/cm2.

Read more
Manipulate easily and quickly

Manipulate easily and quickly

24.06.2019

Are you tired of lifting large and heavy metal sheets or other products using clamps, ropes or chains? Get one of our lifting magnets. We are going to offer you a battery-operated, permanent or electropermanent magnet exactly according to your requirements.

Read more
Laminated blocks for chucks

Laminated blocks for chucks

17.06.2019

Silver brazed laminated blocks are delivered for circular and rectangular chucks. Thanks to them, you can clamp uneven and heterogeneous material.

Read more
Magnetic drilling machine Rotoflux AIR 400

Magnetic drilling machine Rotoflux AIR 400

10.06.2019

This magnetic drilling machine is exceptional due to its pneumatic drive with two nozzles supplying the compressed air. This prevents the generation of sparks and that is why it is ideal for petrochemical plants, during oil and gas extraction, in power plants and in any locations with potentially explosive atmosphere.

Read more
Magnetic base for measuring equipment Magbase 3D

Magnetic base for measuring equipment Magbase 3D

03.06.2019

This magnetic base is an excellent portable device for mounting the measuring arm onto ferromagnetic material.

Read more
Magnetic drilling machine Rotoflux ACU 500

Magnetic drilling machine Rotoflux ACU 500

27.05.2019

This battery-powered magnetic drilling machine is a very compact cordless machine. Thanks to ACU power, it is fully portable and you can drill with it almost anywhere.

Read more
WBM magnetic blocks

WBM magnetic blocks

20.05.2019

The WBM blocks will replace complex vices. You will easily clamp with them flat, round, square, and other profiles made of ferromagnetic material that you can weld, cut, grind, drill or machine otherwise.

Read more
Portable magnetism measuring tool MH-107

Portable magnetism measuring tool MH-107

13.05.2019

Make use of our new measuring tool MH-107 for measuring the residual magnetism in workpieces and components exposed to magnetic fields.

Read more
Magnetic drilling machines Rotoflux

Magnetic drilling machines Rotoflux

06.05.2019

You will exploit our magnetic drilling machines in general-purpose workshops, large producing plants and anywhere you need to drill into ferromagnetic materials. These are equipped with electromagnet that will help you hold the drilling machine on the workpiece.

Read more
Circular magnetic chuck Maxgrip

Circular magnetic chuck Maxgrip

02.05.2019

Permanent magnetic chuck Maxgrip is an ideal choice both for circular grinding and turning. Its holding force of up to 160 N/cm2 ensures stable clamping of even relatively small and thin components.

Read more
Fixar - compound sine table

Fixar - compound sine table

23.04.2019

If single axis tilting provided by our simple sine table is not enough for you, we have the compound sine table for you.

Read more
Fixar simple sine table

Fixar simple sine table

15.04.2019

This sine table, designed for angular grinding, is noted for its high accuracy. You can select angle setting in longitudinal or transverse axes.

Read more
Neopower pallet versatile magnetic chuck

Neopower pallet versatile magnetic chuck

09.04.2019

The Neopower pallet magnetic chuck is designed for clamping of medium large up to large parts on automatic machining centres.

Read more
Easy grinding on Neomill Compact pallet chuck

Easy grinding on Neomill Compact pallet chuck

01.04.2019

The Neomill Compact pallet chuck is highly versatile. It is designed primarily for flat surface grinding, but it also copes with milling, electrical discharge machining and measuring operations.

Read more
Neodymax magnetic chuck for grinding

Neodymax magnetic chuck for grinding

25.03.2019

The Neodymax magnetic chuck with a holding force of up to 120 N/cm2 ranks among our strongest permanent chucks. It is suitable for heavy grinding but also for lighter milling.

Read more
Neospark magnetic chuck

Neospark magnetic chuck

18.03.2019

This chucking table has a very low structure thanks to which you do not lose your working area. It is developed primarily for electrical discharge machining.

Read more
Neopower - the strongest permanent chuck

Neopower - the strongest permanent chuck

11.03.2019

The Neopower magnetic chuck provides you with the highest holding force of all permanent magnets, namely up to 160 N/cm2.

Read more
Neogrip magnetic chuck for final grinding

Neogrip magnetic chuck for final grinding

04.03.2019

The Neogrip magnetic circular chuck is designed specifically for clamping of very thin and small workpieces. However, it can also cope with the bigger ones, so it is a versatile tool in every production.

Read more
Permagrip permanent magnetic chuck

Permagrip permanent magnetic chuck

25.02.2019

The Permagrip magnetic chuck is suitable for round grinding and turning. The neodymium magnetic system provides the holding power of up to 80 N/cm2. It has a steel base with a robust switching mechanism.

Read more
Unigrip universal magnetic chuck

Unigrip universal magnetic chuck

19.02.2019

The Unigrip magnetic chuck is suitable for common everyday use thanks to its favourable price and holding force of 90 N/cm2. It will hold medium sized up to large workpieces well.

Read more
Ferromax circular chuck

Ferromax circular chuck

11.02.2019

The Ferromax permanent chuck is ideal for turning and round grinding. It has a silver-brazed pole plate and an aluminium base with the possibility of mounting on the flange or into the chuck.

Read more
Electrofine and Microfine electromagnetic chucks

Electrofine and Microfine electromagnetic chucks

04.02.2019

For precise flat surface grinding, we offer the Electrofine magnetic chuck. It is used preferably for machining of smaller parts from 25 x 25 x 3 mm.

Read more
BJP electromagnetic chuck

BJP electromagnetic chuck

28.01.2019

The BJP magnetic chuck is one of our most universal chucks. Thanks to the combined pole pitch, it will hold small parts from 35 x 35 x 3 mm up to massive workpieces.

Read more
Neomill Compact magnetic chuck

Neomill Compact magnetic chuck

21.01.2019

The Neomill Compact permanent magnetic chuck with transverse poles will surprise you with its large clamping power of up to 160 N/cm2.

Read more
TM-801 magnetism measuring tool

TM-801 magnetism measuring tool

14.01.2019

For measuring residual magnetism, the magnetic flux of engines, products which were manufactured on a magnetic chuck, or for measuring the magnetic properties of various products, we offer the TM-801 magnetic meter.

Read more
TDM tunnel demagnetizer

TDM tunnel demagnetizer

08.01.2019

This demagnetizer is specially designed for non-stop operation. It removes residual magnetism from all sides to a certain depth, which is why it is important to select the correct size.

Read more
MC hand magnet

MC hand magnet

02.01.2019

Hand magnets are manufactured especially for manual handling, which is why any suspension from hooks or other structures is not permitted.

Read more
Neomicro magnetic chuck

Neomicro magnetic chuck

17.12.2018

The Neomicro permanent chuck with transverse poles is ideal for the precise grinding of small and thin, but also large workpieces.

Read more
Neo EP electro-permanent magnet

Neo EP electro-permanent magnet

10.12.2018

The Neo EP lifting magnet is the ideal solution for frequent turning of workpieces. The magnet turns on and off with a simple electric impulse, and the load is held during transfer by strong permanent magnets, which in turn saves energy.

Read more
Neo HOT lifting magnet with a weight capacity of up to 2,000 kg

Neo HOT lifting magnet with a weight capacity of up to 2,000 kg

03.12.2018

The Neo HOT permanent magnet is ideal for the hardest operations. You can handle loads with a temperature of 180 °C. It is intended for lifting both flat and round materials.

Read more
The BMP lifting magnet with a lifting capacity of up to 3,600 kg

The BMP lifting magnet with a lifting capacity of up to 3,600 kg

26.11.2018

The BMP lifting magnet is specially built for handling round material. It may also be used for lifting sheets, blocks, forgings, castings and blowouts.

Read more
GP250 permanent magnet

GP250 permanent magnet

19.11.2018

The GP250 crane magnet is ideal for manipulating workpieces to a vertical position and vice-versa. One advantage is the large lockable suspension lug, thanks to which you can handle loads in both positions.

Read more
Neostar permanent magnetic chuck in stock

Neostar permanent magnetic chuck in stock

12.11.2018

Neostar is a magnetic chuck intended for the clamping of ring shaped workpieces (part) during turning and grinding during milling and round grinding.

Read more
Alustar aluminium magnetic chuck

Alustar aluminium magnetic chuck

12.11.2018

The Alustar permanent magnetic circular chuck with radial poles is suitable for turning and grinding workpieces of circular shape. Thanks to the smooth adjustment of the clamping force, centring is easier than with other magnetic chucks.

Read more
DM table demagnetiser

DM table demagnetiser

05.11.2018

The DM demagnetiser ensures fast and simple demagnetization of flat or small cylindrical tools.

Read more
NEO HV handling arm

NEO HV handling arm

29.10.2018

The Neo HV handling arm is an ideal accessory to our Neo series of lifting magnets. This arm makes it possible to manipulate steel plates from the horizontal position to the vertical position, and vice versa.

Read more
Electro-permanent magnetic chuck Mastermill

Electro-permanent magnetic chuck Mastermill

22.10.2018

The Mastermill electro-permanent magnetic chuck with square poles has a wide range of applications. It is able to clamp both small and large workpieces. With its high clamping force of 170 N/cm2, it is an ideal magnet for milling.

Read more
BM Lifting magnet

BM Lifting magnet

15.10.2018

The battery operated BM lifting magnet has a wide spectrum of uses. It’s ideal for dispatching, warehouses, and operational purposes. It is ideal for lifting plates and blocks and also for working with various workpieces, castings, and forgings.

Read more
PERMANENT LIFTING MAGNETS IN STOCK

PERMANENT LIFTING MAGNETS IN STOCK

11.10.2018

We are traditional manufacturer of permanent lifting magnets and we can fully guarantee their high quality. This is why we offer a 5-year warranty. Simple Easy Switch controls with one-handed operation lead to time savings of up to 40 %! We have magnets in stock and which can be delivered can be delivered immediately.

Read more
Elmag Wave - electromagnetic grinding chuck

Elmag Wave - electromagnetic grinding chuck

08.10.2018

The Elmag Wave electromagnetic chuck can handle high working loads perfectly. You can rely on it during heavy-duty and strong performance flat grinding but also during roughing mainly on vertical grinders.

Read more
HD hand demagnetiser

HD hand demagnetiser

04.10.2018

For the elimination of residual magnetism of large and complex parts, we offer the HD handheld demagnetiser.

Read more
Visit us at MSV 18 at Brno.

Visit us at MSV 18 at Brno.

31.08.2018

Are you thinking about choosing a lifting magnet or a magnetic chuck? Do you want to see it live first and discuss all its advantages and disadvantages?

Read more
WALMAG AT THE EMO HANNOVER 2017!

WALMAG AT THE EMO HANNOVER 2017!

14.11.2017

In October 2017 Walmag took a part at the one of the biggest trade fairs in the world.

Read more
25th anniversary

25th anniversary

10.10.2016

The company WALMAG MAGNETICS from Kroměříž has a history of 25 years and its quality products are today delivered to fifty countries. She passed through the period of crisis, as well as boom, and after the quarter century is still a major player on field of industial magnets production. Let´s take a peek into the past.

Read more
BUX is in the WALMAG hands

BUX is in the WALMAG hands

10.10.2016

Czech manufacturer WALMAG with 25 years of history returns from 1.10.2016 to label BUX for lifting products.

Read more