+420 573 341 641
  info@walmag.cz

Elmax


Construction

  • Flame cut top plate with epoxy resin gaps
  • Life span (regrinding limit): 10 mm
  • Pole pitch: 18 and 25 mm depending on chuck size
  • Solid body with firmly embedded coils
  • Watertight assembly
  • Optimized holding force – power consumption ratio
  • Standard input voltage: 110 VDC
  • Nominal holding force: 140 N/cm2
  • Other sizes and voltages can be supplied on request

Applications

  • Rough and finish grinding of medium to large size components
  • The pole configuration allows to use the clamping surface up to the edges of the chuck
  • Recommended minimum component size: 36 x 10 and 50 x 15 mm respectively

Scope of supply

  • Back and end stop
  • Set of clamps
  • Power cord of 3 m

Suitable control unit

Consult with us a suitable control unit and electrical connection.
For more information, see the section control units.

Model Pole pitch W[mm] L [mm] H [mm] P [mm] Wattage [W] Weight [kg]
ELMA P18 300 500 79 18 108 80
ELMA P18 300 600 79 18 125 93
ELMA P18 300 1000 79 18 196 160
ELMA P18 300 1500 79 18 285 240
ELMA P25 400 600 83 25 160 142
ELMA P25 400 1500 83 25 360 355
ELMA P25 500 800 83 25 244 235
ELMA P25 500 1000 83 25 298 294
ELMA P25 500 1500 83 25 435 442
ELMA P25 600 1000 83 25 345 352
ELMA P25 600 1500 83 25 505 530