Language
  +420 573 341 641
  info@walmag.cz

Electrofine


Construction

  • Solid top plate with transverse poles
  • Pole division: Fine 3 mm steel and 1 mm brass, Microfine 1.4 mm steel and 0.5 mm brass
  • Life span (regrinding limit): 6 mm
  • Multi core magnetic system
  • Solid piece body with firmly embedded coils
  • Standard input voltage: 110 VDC
  • Nominal holding force: 100 N/cm2 and 110 N/cm2
  • Other sizes and voltages can be supplied on request
  • Electrofine chucks with longitudinal poles can also be supplied

Applications

  • Surface grinding of small size up to large components
  • Recommended minimum workpiece size for Electrofine: 25 x 25 x 3 mm
  • Recommended minimum workpiece size for Microfine: 15 x 15 x 1 mm

Scope of supply

  • Back and end stop
  • Set of clamps
  • Power cord of 3 m

Suitable control unit

Consult with us a suitable control unit and electrical connection.
For more information, see the section control units.

Elektrofine

Model W [mm] L [mm] H [mm] Wattage [W] Weight [kg] Pole pitch
ELEC150300T31 150 300 74 77,5 25 T4 3+1
ELEC200400T31 200 400 74 112 41 T4 3+1
ELEC200500T31 200 500 74 166 55 T4 3+1
ELEC200600T31 200 600 74 137 65 T4 3+1
ELEC300600T31 300 600 74 253 94 T4 3+1

Mikrofine

Model W [mm] L [mm] H [mm] Wattage [W] Weight [kg] Pole pitch
ELEC150250T1405 150 250 72 71 19 T1,9 1,4+0,5
ELEC500300T1405 500 300 72 78 22 T1,9 1,4+0,5
ELEC200400T1405 200 400 72 113 39 T1,9 1,4+0,5
ELEC200500T1405 200 500 72 166 52 T1,9 1,4+0,5
ELEC200600T1405 200 600 72 137 61 T1,9 1,4+0,5
ELEC300600T1405 300 600 72 252 97 T1,9 1,4+0,5