+420 573 341 641
  info@walmag.cz

Mastermill


Construction

  • Pole size 50 x 50 mm with 10 mm gaps
  • Extremely low height 51 mm
  • Nominal holding force 170 N/cm2

Application

  • Five sided machining
  • Milling
  • Boring of large moulds, ingots, blocks, frames, etc.
  • Minimum workpiece height 12 mm

Scope of supply

  • Quick Push-pull connector
  • Stoppers on 2 sides
  • 3 m long armoured cable
  • 2 - 4 chuck clamps

Options for Mastermill chucks

  • Different cable junction box location
  • Through-going holes for fixing the chuck to the machine table
  • Holes for pole extensions
  • Fixed and adjustable pole extensions, allowing machining from 5 sides
  • Other input voltages

Suitable control unit

Consult with us a suitable control unit and electrical connection.
For more information, see the section control units.

Model Number of poles W [mm] L [mm] H [mm] Weight [kg]
MM50300430 24 300 430 51 44
MM50300490 24 300 490 51 49
MM50300600 32 300 600 51 61
MM50300800 40 300 800 51 82
MM50300900 48 300 900 51 92
MM50420430 36 420 430 51 61
MM50420490 36 420 490 51 70
MM50420600 48 420 600 51 86
MM50420800 60 420 800 51 114
MM50420900 72 420 900 51 128
MM50420990 72 420 990 51 142
MM50480490 42 480 490 51 80
MM50480600 56 480 600 51 97
MM50480800 70 480 800 51 130
MM50480900 84 480 900 51 146
MM50480990 84 480 990 51 161
MM50580600 64 580 600 51 118
MM50580800 80 580 800 51 157
MM50580900 96 580 900 51 177
MM50580990 96 580 990 51 194
MM50600600 72 600 600 51 122
MM50600800 90 600 800 51 163
MM50600900 108 600 900 51 183
MM50600990 108 600 990 51 201