+420 573 341 641
  info@walmag.cz

BM - Lifting magnet


BM 1350, BM 2500, BM 3600, BM 5000  These models are designed to lift heavy, thick plates and blocks. Thanks to the good depth of field, these models cope very well with ingots and forgings.

Application

  • Handling heavy loads up to 5,000 kg
  • Lifting cut-off from saws and burning tables
  • Handling loads with poor accessibility (using IR remote control)
  • New function Variable force - pre-setting of lower magnetic field intensity according to actual need
  • The „Tip-off” feature allows to drop excess plates in case multiple plates are picked up from a stack

Construction

  • Solid magnetic base with durable embedded coil
  • Powered by built-in 12 V battery
  • At least 8 hours of operation at 50% duty
  • Hand-held, IR remote control unit allows to operate the lifting magnet from up to 10 metres
  • High degree of safety (coefficient 2)
  • Controller/battery enclosure with detachable front and back panel

High degree of safety

  • Bail sensor prevents switching off the magnet while the load is being lifted
  • Dual push buttons for RELEASE
  • Visual and audible alarms indicate low battery level
  • Magnet cannot be turned „ON” if battery charge is too low
Model Flat material [kg] Tested lifting capacity [kg] L x W of base [mm] Height up to crane hook [mm] Weight [kg] Built in battery [V/Ah] Type of battery
BM 1350 1350 2700 272 x 242 460 60 12V / 35 Ah FG12 - 35 D
BM 2500 2500 5000 400 x 242 460 72 12V / 75 Ah FG12 - 75 D
BM 3600 3600 7200 1050 x 240 460 180 12V / 75 Ah FG12 - 75 D
BM 5000 5000 10 000 1200 x 300 460 203 12V / 75 Ah FG12 - 75 D